What do I need to hang a lamp from the ceiling?

To hang a pendant lamp from a ceiling, you need a canopy (ceiling rose) to cover the electrical junction, a textile or PVC cable rated H03VV-F 3×0.75 mm² for the suspension and wiring, a lamp holder (such as E27 or E14) with an integrated strain relief to protect the electrical connections, and a suitable bulb. For heavier luminaires, a ceiling hook or mounting bracket rated for the lamp's weight is also required. All these components are available individually so you can assemble exactly the configuration you need.

What are the three main types of lamp sockets?

The three principal lamp socket families are: screw bases (Edison), including E14, E27 and E40, where the lamp is twisted into the holder; bayonet caps, such as B22d, where the lamp is pushed in and rotated to lock; and pin bases, which cover a wide range including GU10, GU5.3, G9, G4, G13 and R7s, where one or more pins make the electrical contact. Each family is further divided by pin spacing, voltage rating and maximum wattage, so always check the full socket designation before ordering a replacement holder or lamp.

Can lamp shades be replaced without buying a new luminaire?

Yes — lamp shades can be replaced independently in most standard luminaires. Replacement shades are available in fabric, glass, metal and plastic, and attach to the fitting via a spider frame, a ring adapter or a direct screw fitting (typically M10×1 thread). When ordering a replacement shade, note the fitting diameter, the attachment method and the maximum wattage the shade material can tolerate. Replacing a shade is a cost-effective way to refresh the look of a luminaire or repair damage, and it is far more sustainable than discarding the entire fitting.

What are the four main types of luminaires?

The four principal luminaire types are: pendant luminaires, which hang from the ceiling on a cable, rod or chain; surface-mounted luminaires, fixed directly to the ceiling or wall; recessed luminaires, installed flush into a ceiling void or wall recess; and track-mounted luminaires, clipped onto a 1-phase or 3-phase track rail for flexible, repositionable lighting. Each type requires specific accessories — canopies and suspension hardware for pendants, mounting frames for recessed fittings, and track adapters and feed-ins for track systems.

Which spare parts are available for older lamps and luminaires?

A wide range of spare parts is available for older luminaires, including replacement lamp holders (E27, E14, G9, GU10 and more), lamp shades and replacement glasses, canopies, strain reliefs, screw rings, cord switches, threaded rods and hex nuts, textile and PVC cables, and ballasts or starters for fluorescent fittings. In many cases, repairing an existing luminaire with genuine spare parts is both more economical and more environmentally responsible than replacing the entire fitting. If you are unsure which part you need, our contact and service team can help identify the correct component.

Which accessories do I need for a track lighting system?

A complete track lighting installation requires: the track rail itself (1-phase or 3-phase, surface-mounted, recessed or pendant); a live end feed-in to connect the track to the mains supply; straight connectors, L-joiners or T-joiners if the track run changes direction; end caps to seal open track ends safely; track adapters for each spotlight; and, for pendant track installations, wire rope suspension kits with adjustable ceiling anchors. For 3-phase systems, you will also need to plan which spotlights connect to which circuit to enable independent switching of different lighting zones.

What is the difference between a conventional ballast (CCG) and an electronic ballast (ECG)?

A conventional ballast (CCG) uses a magnetic iron-core inductor to limit current to fluorescent or discharge lamps. It operates at mains frequency (50 Hz), which can cause visible flicker, and consumes 10–15 % more energy than the lamp wattage alone. A separate starter is required. An electronic ballast (ECG) operates at 40–50 kHz, eliminating flicker, improving lamp efficacy by up to 20 %, and removing the need for a starter. ECG units are lighter, run cooler and are the preferred choice for offices, retail environments and any application where light quality matters. Both types must be matched to the lamp wattage.

Which luminaire accessories are best suited for retail and hospitality environments?

For retail shops, restaurants and showrooms, the most important luminaire accessories are 3-phase track system components — Eutrac feed-ins, adapters, connectors and suspension kits — which allow flexible, independently controlled accent and ambient lighting. High-CRI LED drivers (CRI ≥ 90) paired with dimmable spotlights ensure merchandise and interiors are shown at their best. For hospitality settings with a vintage or retro aesthetic, brass E27 lamp holders, textile cables in coordinating colours and decorative canopies create the warm, characterful atmosphere that guests expect. IP44-rated accessories are essential wherever luminaires are installed in outdoor terraces or kitchen areas.

Close menu

Leuchtmittel-Verkauf englisch

Accessories for lighting

Categories

Accessories for 1 Phase track

show

Accessories for 3 Phase track

1587 Articles

Sorting

Express delivery possible

Socket

GU10
G13
E27

Luminous flux (Lumen)

from 350 to 4100

Colour temperature (Kelvin)

from 2600 to 6500

Nominal voltage (Volt)

from 3 to 600

Power (Watt)

from 0.1000000015 to 4000

Light colour

Warm white
Neutral white
Daylight white
Neutral white

Dimmable

Illuminant type

LED lamp

Manufacturer

American DJ
Artecta
Eurolite
Eutrac
ISOLED
Ledvance
Osram
Riggatec
Showtec
SLV

Price

from 0.32 to 8326

20 From 67 pages

Products per page

No results were found for the filter!

ISOLED Mini-Plug 2-fach Verteiler female, 1m, 2x0.75, IP54, schwarz, max. 48V

ISOLED Mini-Plug 2-way distributor female, 1m, 2x0.75, IP54, black, max. 48V

Mini-Plug 2-way distributor female, 1m, 2x0.75, IP54, black, max. 48V Length: 1000mm • Width: 26mm • Height: 15mm • Net weight: 45g • Nominal voltage: 48V DC • Protection...

€5.95 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Mini-Plug RGB Anschlusskabel male, 1m, 4-polig, IP42, weiß, max. 48V

ISOLED Mini-Plug RGB connection cable male, 1m, 4-pin, IP42, white, max. 48V

Mini-Plug RGB connection cable male, 1m, 4-pin, IP42, white, max. 48V Length: 1000mm • Diameter: 8mm • Net weight: 53g • Nominal voltage: 48V DC • Protection class: IP42...

€5.47 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Mini-Plug RGB Anschlussfassung female, 1m, 4-polig, IP42, weiß, max. 48V

ISOLED Mini-Plug RGB connector socket female, 1m, 4-pin, IP42, white, max. 48V

Mini-Plug RGB connector socket female, 1m, 4-pin, IP42, white, max. 48V Length: 1000mm • Diameter: 8mm • Net weight: 53g • Nominal voltage: 48V DC • Protection class: IP42...

€5.47 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Mini-Plug RGB Verlängerung male-female, 1m, 4-polig, IP54, weiß, max. 48V

ISOLED Mini-Plug RGB extension male-female, 1m, 4-pin, IP54, white, max. 48V

Mini-Plug RGB extension male-female, 1m, 4-pin, IP54, white, max. 48V Length: 1000mm • Diameter: 8mm • Net weight: 53g • Nominal voltage: 48V DC • Protection class: IP42...

€6.74 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Mini-Plug RGB 6-fach Verteiler female, 1m, 4-polig, IP54, weiß, max. 48V

ISOLED Mini-Plug RGB 6-way distributor female, 1m, 4-pin, IP54, white, max. 48V

Mini-Plug RGB 6-way distributor female, 1m, 4-pin, IP54, white, max. 48V Length: 1000mm • Width: 66mm • Height: 15mm • Net weight: 58g • Nominal voltage: 48V DC...

€9.72 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Mini-Plug Anschlussblende mit Zugentlastung für 113527/113546, weiß

ISOLED Mini-Plug connection panel with strain relief for 113527/113546, white

Mini-Plug connection panel with strain relief for 113527/113546, white Length: 26mm • Diameter: 21mm • Net weight: 5g • Protection class: IP42 • Material: Polycarbonate...

€2.78 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Mini-Plug Anschlussblende mit Zugentlastung für 113528, schwarz

ISOLED Mini-Plug connection panel with strain relief for 113528, black

Mini-Plug connection panel with strain relief for 113528, black Length: 26mm • Diameter: 21mm • Net weight: 5g • Protection class: IP42 • Material: Polycarbonate • Incl....

€2.78 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED DALI auf 0-10V/1-10V Signal Konverter

ISOLED DALI to 0-10V/1-10V signal converter

DALI to 0-10V/1-10V signal converter Length: 40mm • Width: 28mm • Height: 14mm • Net weight: 10g • Protection class: IP20 • Material: Plastic • Incl. illuminant: No...

€47.60 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Schutzkontakt-Stecker schwarz, 1,5m, lose Kabelenden

ISOLED grounding-type plug black, 1.5m, lose cable heads

grounding-type plug black, 1.5m, lose cable heads Length: 1500mm • Net weight: 170g • Nominal voltage: 250V AC • Nominal power: 4000W • Protection class: IP20 • Material:...

€6.28 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Sys-Pro Push/Funk Mesh PWM-Controller, 1 Kanal, 5-36V DC 8A

ISOLED Sys-Pro Push/Funk-Mesh-PWM-Controller, 1 channel, 5-36V DC 8A

Sys-Pro Push/Funk-Mesh-PWM-Controller, 1 channel, 5-36V DC 8A Length: 107mm • Width: 33mm • Height: 18mm • Net weight: 58g • Nominal voltage: 5-36V DC • Protection class:...

€22.13 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Sys-Pro SingleColor 4 Zonen Fernbedienung mit 4 Szenenspeicher

ISOLED Sys-Pro SingleColour 4 zones remote control with 4 scene memory

Sys-Pro SingleColour 4 zones remote control with 4 scene memory Length: 122mm • Width: 53mm • Height: 18mm • Net weight: 75g • Nominal voltage: 3V DC • Protection class:...

€31.65 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Sys-Pro weißdynamische 4 Zonen Fernbedienung mit 4 Szenenspeicher

ISOLED Sys-Pro dynamic white 4 zones remote control with 4 scene memories

Sys-Pro dynamic white 4 zones remote control with 4 scene memories Length: 122mm • Width: 53mm • Height: 18mm • Net weight: 80g • Nominal voltage: 3V DC • Protection class:...

€29.53 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Ersatzglas für LED Fluter Prismatic 20W

ISOLED Replacement glass for LED floodlight Prismatic 20W

Replacement glass for LED floodlight Prismatic 20W Net weight: 280g • Material: Glass • Incl. illuminant: No • Special features: Replacement glass for floodlight 20W Art.No. 113581...

€5.47 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Ersatzglas für LED Fluter Prismatic 50W

ISOLED Replacement glass for LED floodlight Prismatic 50W

Replacement glass for LED floodlight Prismatic 50W Net weight: 400g • Material: Glass • Incl. illuminant: No • Special features: Replacement glass for floodlight 50W Art.No. 113583...

€7.85 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Sys-One RGB+W 8 Zonen Fernbedienung schwarz

ISOLED Sys-One RGB+W 8 zone remote control black

Sys-One RGB+W 8 zone remote control black Length: 132mm • Width: 44mm • Height: 25mm • Net weight: 74g • Nominal voltage: 4,5V DC • Protection class: IP20 • Material:...

€118.21 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC66 Aluminium für Profil 2SIDE, 2 STK, inkl. Schrauben

ISOLED End cap EC66 aluminium for profile 2SIDE, 2 PCS, incl. screws

End cap EC66 aluminium for profile 2SIDE, 2 PCS, incl. screws Net weight: 5g • Material: Aluminium • Incl. illuminant: No •

€7.54 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC66 Aluminium weiß RAL9010 für Profil 2SIDE, 2 STK, inkl. Schrauben

ISOLED End cap EC66 aluminium white RAL9010 for profile 2SIDE, 2 PCS, incl. screws

End cap EC66 aluminium white RAL9010 for profile 2SIDE, 2 PCS, incl. screws Net weight: 5g • Material: Aluminium • Incl. illuminant: No •

€7.54 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC66 Aluminium schwarz für Profil 2SIDE, 2 STK, inkl. Schrauben

ISOLED End cap EC66 aluminium black for profile 2SIDE, 2 PCS, incl. screws

End cap EC66 aluminium black for profile 2SIDE, 2 PCS, incl. screws Net weight: 5g • Material: Aluminium • Incl. illuminant: No •

€7.54 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC 58B schwarz für Profil SURF16, 2 STK, inkl. Schrauben

ISOLED End cap EC 58B black for profile SURF16, 2 pcs, incl. screws

End cap EC 58B black for profile SURF16, 2 pcs, incl. screws Net weight: 5g • Material: Polycarbonate • Incl. illuminant: No •

€7.85 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC 58W weiß RAL 9010 für Profil SURF16, 2 STK, inkl. Schrauben

ISOLED End cap EC 58W white RAL 9010 for profile SURF16, 2 pcs, incl. screws

End cap EC 58W white RAL 9010 for profile SURF16, 2 pcs, incl. screws Net weight: 2g • Material: Polycarbonate • Incl. illuminant: No •

€7.85 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC 59W weiß RAL 9010 für Profil SURF16 mit Kabeldurchführung, 2 STK, inkl.

ISOLED End cap EC 59W white RAL 9010 for profile SURF16 with cable gland, 2 pcs, incl. screws

End cap EC 59W white RAL 9010 for profile SURF16 with cable gland, 2 pcs, incl. screws Net weight: 2g • Material: Polycarbonate • Incl. illuminant: No •

€7.85 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC 56 Silikon für Profil SURF16 , 1 STK

ISOLED End cap EC 56 silicone for profile SURF16 , 1 pc

End cap EC 56 silicone for profile SURF16 , 1 pc Net weight: 1g • Material: Silicone • Incl. illuminant: No •

€0.48 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC 57 Silikon für Profil SURF16 , 1 STK, mit Kabeldurchführung

ISOLED End cap EC 57 silicone for profile SURF16 , 1 pc, with cable gland

End cap EC 57 silicone for profile SURF16 , 1 pc, with cable gland Net weight: 1g • Material: Silicone • Incl. illuminant: No •

€0.48 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED Endkappe EC 58 Aluminium für Profil SURF16, 2 STK, inkl. Schrauben

ISOLED End cap EC 58 aluminium for profile SURF16, 2 pcs, incl. screws

End cap EC 58 aluminium for profile SURF16, 2 pcs, incl. screws Net weight: 20g • Material: Aluminium • Incl. illuminant: No •

€7.85 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

20 From 67 pages

Products per page

Info

Accessories for Luminaires – Everything You Need at a Glance: Whether you are repairing a beloved pendant light, planning a professional retail track installation, or building a bespoke vintage lamp from scratch — the right luminaire accessories make all the difference. At Leuchtmittel Verkauf, you will find a carefully curated range of spare parts, lamp holders, ballasts, LED drivers, track system components, textile cables and suspension... Read more »